DJI RS 3 Gimbal Stabilizer Combo
Key Features
- Lightweight Design with 6.6 lb Payload
- Combo Includes Focus Motor, Case, Cables
- Advanced 1.8" OLED Touchscreen
- Instant Mode Switching
- Supports Wireless Image Transmitter
- Motion Control with Smartphone
- 12-Hour Operation Time, PD Fast Charging
- Fine-Tuning Knob on Tilt Axis
- Creative Functions Such as Time Tunnel
Overview
The DJI RS 3
has been redesigned to be even lighter and sleeker than the Ronin RSC 2
gimbal at only 2.8 lb with a payload of up to 6.6 lb. This tiny gimbal
is tough enough to support and stabilize a Sony a7S III or Canon R5 with
a 24-70mm zoom lens attached. With a larger full-color OLED display, a
new fine-tuning knob, and greater stability, the RS 3 can become an
essential part of your compact camera kit.
With
dual-layered quick-release plates, mounting a camera onto RS 3 is fast
and convenient. There is no need to rebalance the gimbal after swapping
out a new battery or memory card.
When
the gimbal is powered off, you can press and hold the power button, and
the three axes unlock while the gimbal expands automatically, allowing
you to start working in just two seconds. Press the power button once,
and the axes automatically lock and enter sleep mode, making a move or
storage significantly more efficient.
By
implementing Dual-Mode Bluetooth, the RS 3 supports wireless shutter
control, saving time and effort with every use. After the initial
Bluetooth pairing, you can control video and photo shooting by simply
pressing the record button on the stabilizer. Previously paired cameras
can automatically reconnect after the first use, eliminating the need
for a camera control cable.
- With
a newly added fine-tuning knob on the tilt axis, the camera can slide
forward or backward with millimeter-grade precision adjustments to
achieve accurate balancing more easily when changing the lens.
- By
simply sliding the new gimbal mode switch, you can alternate between
Pan follow, Pan and Tilt follow, and FPV modes. The FPV mode selection
is also customizable to 3D Roll 360, Portrait, or Custom, allowing you
to adjust your equipment and get started as fast as possible.
- Rotating
the front dial allows you to control zoom or focus. It can also be
customized to control the camera's shutter, aperture, ISO, or gimbal
movements, making it exceptionally convenient for single-handed
operation.
Third-Gen RS Stabilization Algorithm
Empowered by a
next-generation stabilization algorithm, the RS 3 provides 20% enhanced
stability over the RSC 2, effortlessly managing low-angle shots, running
scenarios, or switching between high and low positions.
When
SuperSmooth mode is enabled, RS 3 increases motor torque to further
enhance stabilization, delivering stable footage even in fast-moving
scenarios or with 100mm-equivalent focal lenses.
Compared
with the black-and-white screen of RSC 2, RS 3 is equipped with a 1.8"
OLED full-color touchscreen with an 80% larger display. It also supports
most Ronin app settings, providing intuitive and precise control
together with the redesigned user interface.
RS
3 supports the Ronin Image Transmitter (previously known as the Ronin
RavenEye Image Transmitter) to transmit 1080p30 HD live feeds directly
to a mobile device. The maximum transmission distance is 656 feet, and
the end-to-end transmission latency is as low as 60 ms. A smartphone can
also be attached to the NATO port on the RS 3 with the phone holder for
wireless monitoring.
Remotely
adjust camera exposure directly in the Ronin app, or control the gimbal
with the virtual joystick to get an integrated monitoring and control
experience. With the Ronin Image Transmitter, a smartphone can be used
as a motion controller to remotely control the RS 3 gimbal for more
flexible and dynamic camera movements.
The
new RS 3 battery grip features a cartridge design, making it easier to
swap batteries and smaller for storage compared with the RSC 2. It can even
be charged separately from the gimbal. The new battery grip provides an
extended runtime of up to 12 hours, enough for continuous shooting all
day. It supports 18W PD fast charging with a charge time of just 2.5
hours. It can even be used while charging to keep RS 3 powered almost
indefinitely.
The camera retains all the intelligent motion functions such as Dolly Zoom, Motionlapse, Track, Time Tunnel, and Panorama.
The
redesigned briefcase handle is foldable for convenient storage and
comes with a new ergonomic handle to make it easier and faster to
install and switch to Briefcase mode. The built-in cold shoe mount and
1/4"-20 mounting holes can connect to external monitors for shooting
assistance, making low-angle camera movements more intuitive.
The
next-generation DJI RS Focus Motor (2022) provides torque three times
stronger (up to 1 N·m) and noise is reduced by 50%. This delivers a
smoother focusing experience and reduces the effect of audio recording.
It also adopts a quick-release structure, allowing it to be assembled
easily without any tools for faster use.